Board index Flathead Power-Technical Questions, Answers, and Suggestions 45 Flatties WL vs RL exhaust

WL vs RL exhaust

Post Wed Jan 21, 2015 9:55 am

Posts: 1786
I'm just looking at exhaust pipes for the 45" bike in the Ariel frame. After various experiments and the arrival if other projects this bike now has mid pegs, which solves the problem if the clash between the footboard support and the rear downpipe.

I see a set listed described as "RL pipes". The obvious difference is that they don't have the "flat pipe" section.

So; are the port angles and positions the same as the WL engine? Would they fit a WL engine?
Shoot, a man could have a good weekend in Dallas with all that stuff...

Return to 45 Flatties